Clear Holographic Honeycomb Headlight Film with Air Channel Paper Liner
Most clear headlight film disappears once it's on the lens. This one doesn't. The honeycomb pattern is pressed directly into the film, so instead of a flat, glassy surface, the lens picks up a faceted texture that catches light at an angle and throws it back in small flashes of color, more like a subtle iridescent shimmer than a straightforward tint.
That texture is also functional. A flat film shows every scratch and swirl mark in one continuous sheen, but the honeycomb structure breaks up the surface enough that minor marks blend into the pattern instead of standing out. Light transmission still tests at 43%, so the effect sits on top of the lens rather than dimming what's underneath.
Cutting this one takes a bit more care than a plain film. Because the texture is molded rather than printed, over-stretching around tight curves can flatten the honeycomb cells and dull the shimmer in that spot, so it's worth working in smaller sections on complex headlight shapes rather than pulling one continuous sheet across the whole lens.
Features And Specifications
- Honeycomb texture is molded into the film, not printed, so it won't wear off or fade
- Tested at 43% light transmission, so the pattern shows without dimming the headlight output
- Holographic surface shifts color under direct light instead of sitting flat like plain film
- Handles moisture, humidity, and road salt without lifting at the edges
- Holds up against heat, UV exposure, and everyday scratches without cracking
- Acrylic adhesive stays repositionable until you commit to the final placement
- Peel-off top layer protects the textured surface until installation is finished
- Works indoors or out, on automotive, architectural, or signage surfaces
- Sizes available: 1ft, 2ft, 4ft, 8ft, 16ft, and 32ft.
- Color: Clear, transparent.
- Pattern: Honeycomb.
- Finish: Holographic
- Packaging: Roll.
- Application Method: Dry application provides better results
Video
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Physical Properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
Information on physical and chemical characteristics and values in this document are based upon tests we believe to be reliable and do not constitute a warranty. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of this material to their specific use. All technical data are subject to change. In case of any ambiguities or differences between the English and foreign versions of this document, the English version shall be prevailing and leading.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable VinylFrog product packaging or product literature, VinylFrog warrants that each VinylFrog product meets the applicable VinylFrog product specification at the time VinylFrog ships the product.VinylFrog MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the VinylFrog product does not conform to this warranty, then the sole and exclusive remedy is, at VinylFrog’s option, replacement of the VinylFrog product or refund of the purchase price.
Limitation Of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from the VinylFrog product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Original: $3.59
-65%$3.59
$1.26More Images
Clear Holographic Honeycomb Headlight Film with Air Channel Paper Liner
Most clear headlight film disappears once it's on the lens. This one doesn't. The honeycomb pattern is pressed directly into the film, so instead of a flat, glassy surface, the lens picks up a faceted texture that catches light at an angle and throws it back in small flashes of color, more like a subtle iridescent shimmer than a straightforward tint.
That texture is also functional. A flat film shows every scratch and swirl mark in one continuous sheen, but the honeycomb structure breaks up the surface enough that minor marks blend into the pattern instead of standing out. Light transmission still tests at 43%, so the effect sits on top of the lens rather than dimming what's underneath.
Cutting this one takes a bit more care than a plain film. Because the texture is molded rather than printed, over-stretching around tight curves can flatten the honeycomb cells and dull the shimmer in that spot, so it's worth working in smaller sections on complex headlight shapes rather than pulling one continuous sheet across the whole lens.
Features And Specifications
- Honeycomb texture is molded into the film, not printed, so it won't wear off or fade
- Tested at 43% light transmission, so the pattern shows without dimming the headlight output
- Holographic surface shifts color under direct light instead of sitting flat like plain film
- Handles moisture, humidity, and road salt without lifting at the edges
- Holds up against heat, UV exposure, and everyday scratches without cracking
- Acrylic adhesive stays repositionable until you commit to the final placement
- Peel-off top layer protects the textured surface until installation is finished
- Works indoors or out, on automotive, architectural, or signage surfaces
- Sizes available: 1ft, 2ft, 4ft, 8ft, 16ft, and 32ft.
- Color: Clear, transparent.
- Pattern: Honeycomb.
- Finish: Holographic
- Packaging: Roll.
- Application Method: Dry application provides better results
Video
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Physical Properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
Information on physical and chemical characteristics and values in this document are based upon tests we believe to be reliable and do not constitute a warranty. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of this material to their specific use. All technical data are subject to change. In case of any ambiguities or differences between the English and foreign versions of this document, the English version shall be prevailing and leading.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable VinylFrog product packaging or product literature, VinylFrog warrants that each VinylFrog product meets the applicable VinylFrog product specification at the time VinylFrog ships the product.VinylFrog MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the VinylFrog product does not conform to this warranty, then the sole and exclusive remedy is, at VinylFrog’s option, replacement of the VinylFrog product or refund of the purchase price.
Limitation Of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from the VinylFrog product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Most clear headlight film disappears once it's on the lens. This one doesn't. The honeycomb pattern is pressed directly into the film, so instead of a flat, glassy surface, the lens picks up a faceted texture that catches light at an angle and throws it back in small flashes of color, more like a subtle iridescent shimmer than a straightforward tint.
That texture is also functional. A flat film shows every scratch and swirl mark in one continuous sheen, but the honeycomb structure breaks up the surface enough that minor marks blend into the pattern instead of standing out. Light transmission still tests at 43%, so the effect sits on top of the lens rather than dimming what's underneath.
Cutting this one takes a bit more care than a plain film. Because the texture is molded rather than printed, over-stretching around tight curves can flatten the honeycomb cells and dull the shimmer in that spot, so it's worth working in smaller sections on complex headlight shapes rather than pulling one continuous sheet across the whole lens.
Features And Specifications
- Honeycomb texture is molded into the film, not printed, so it won't wear off or fade
- Tested at 43% light transmission, so the pattern shows without dimming the headlight output
- Holographic surface shifts color under direct light instead of sitting flat like plain film
- Handles moisture, humidity, and road salt without lifting at the edges
- Holds up against heat, UV exposure, and everyday scratches without cracking
- Acrylic adhesive stays repositionable until you commit to the final placement
- Peel-off top layer protects the textured surface until installation is finished
- Works indoors or out, on automotive, architectural, or signage surfaces
- Sizes available: 1ft, 2ft, 4ft, 8ft, 16ft, and 32ft.
- Color: Clear, transparent.
- Pattern: Honeycomb.
- Finish: Holographic
- Packaging: Roll.
- Application Method: Dry application provides better results
Video
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Physical Properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
Information on physical and chemical characteristics and values in this document are based upon tests we believe to be reliable and do not constitute a warranty. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of this material to their specific use. All technical data are subject to change. In case of any ambiguities or differences between the English and foreign versions of this document, the English version shall be prevailing and leading.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable VinylFrog product packaging or product literature, VinylFrog warrants that each VinylFrog product meets the applicable VinylFrog product specification at the time VinylFrog ships the product.VinylFrog MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the VinylFrog product does not conform to this warranty, then the sole and exclusive remedy is, at VinylFrog’s option, replacement of the VinylFrog product or refund of the purchase price.
Limitation Of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from the VinylFrog product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
