Glossy Metallic Vampire Red Color PPF (Paint Protection Film)
VinylFrog Vampire Red is not a shy red. It is a smooth, glossy metallic finish that hits hard and stays red, no fading to pink, no shift to orange, no dulling over time. Under clouds or in shade, the color holds a deep blood red with a quiet metallic pulse. In direct sun, the gloss fires up and the flake pops like fresh wet paint.
But this is not just a colored wrap. It is true TPU paint protection film. The same material used in high-end clear bras. So while other red wraps add color and nothing else, Vampire Red takes the hit. Rock chips. Road debris. Scratches. UV rays. Your factory paint stays perfect. The heat-activated self-healing topcoat erases light marks with a heat gun, hot water, or a sunny day.
The hydrophobic surface sheds water, mud, and stains. Acrylic adhesive bonds strong but lets you slide and reposition during install. Dry application with air-release channels means no bubbles, no slip solutions. Professional installers and serious DIYers can both handle it. This is protection that does not whisper. This is Vampire Red.
Features
- Smooth glossy metallic finish: bright Vampire Red with fine metallic flake that stays red and does not fade to pink or orange
- Durable TPU material: high-performance protection that resists rock chips, road debris, scratches, and UV damage
- Self-adhesive film: bonds securely to your factory paint with no extra glue or primer needed
- Heat-activated self-healing topcoat: erases light marks and swirls with a heat gun, hot water, or direct sun
- Hydrophobic surface: repels water, mud, bird droppings, and tree sap. Stains do not stick. UV rays do not fade
- Scratch-resistant and anti-corrosion: stands up to keys, brushes, road salt, and harsh weather
- Heat and UV resistant: no yellowing, no bubbling, no cracking over time
- Acrylic-based robust adhesive: strong bond that does not lift at edges. Lets you slide and reposition during install
- Easy to slide and reposition: adjust the film while you lay it down. Press firmly when position is right
Specifications
- Color: Vampire Red.
- Finish: Glossy Metallic.
- Application Method: Dry Application.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Things You Should Know:
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Original: $119.00
-65%$119.00
$41.65More Images
Glossy Metallic Vampire Red Color PPF (Paint Protection Film)
VinylFrog Vampire Red is not a shy red. It is a smooth, glossy metallic finish that hits hard and stays red, no fading to pink, no shift to orange, no dulling over time. Under clouds or in shade, the color holds a deep blood red with a quiet metallic pulse. In direct sun, the gloss fires up and the flake pops like fresh wet paint.
But this is not just a colored wrap. It is true TPU paint protection film. The same material used in high-end clear bras. So while other red wraps add color and nothing else, Vampire Red takes the hit. Rock chips. Road debris. Scratches. UV rays. Your factory paint stays perfect. The heat-activated self-healing topcoat erases light marks with a heat gun, hot water, or a sunny day.
The hydrophobic surface sheds water, mud, and stains. Acrylic adhesive bonds strong but lets you slide and reposition during install. Dry application with air-release channels means no bubbles, no slip solutions. Professional installers and serious DIYers can both handle it. This is protection that does not whisper. This is Vampire Red.
Features
- Smooth glossy metallic finish: bright Vampire Red with fine metallic flake that stays red and does not fade to pink or orange
- Durable TPU material: high-performance protection that resists rock chips, road debris, scratches, and UV damage
- Self-adhesive film: bonds securely to your factory paint with no extra glue or primer needed
- Heat-activated self-healing topcoat: erases light marks and swirls with a heat gun, hot water, or direct sun
- Hydrophobic surface: repels water, mud, bird droppings, and tree sap. Stains do not stick. UV rays do not fade
- Scratch-resistant and anti-corrosion: stands up to keys, brushes, road salt, and harsh weather
- Heat and UV resistant: no yellowing, no bubbling, no cracking over time
- Acrylic-based robust adhesive: strong bond that does not lift at edges. Lets you slide and reposition during install
- Easy to slide and reposition: adjust the film while you lay it down. Press firmly when position is right
Specifications
- Color: Vampire Red.
- Finish: Glossy Metallic.
- Application Method: Dry Application.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Things You Should Know:
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
VinylFrog Vampire Red is not a shy red. It is a smooth, glossy metallic finish that hits hard and stays red, no fading to pink, no shift to orange, no dulling over time. Under clouds or in shade, the color holds a deep blood red with a quiet metallic pulse. In direct sun, the gloss fires up and the flake pops like fresh wet paint.
But this is not just a colored wrap. It is true TPU paint protection film. The same material used in high-end clear bras. So while other red wraps add color and nothing else, Vampire Red takes the hit. Rock chips. Road debris. Scratches. UV rays. Your factory paint stays perfect. The heat-activated self-healing topcoat erases light marks with a heat gun, hot water, or a sunny day.
The hydrophobic surface sheds water, mud, and stains. Acrylic adhesive bonds strong but lets you slide and reposition during install. Dry application with air-release channels means no bubbles, no slip solutions. Professional installers and serious DIYers can both handle it. This is protection that does not whisper. This is Vampire Red.
Features
- Smooth glossy metallic finish: bright Vampire Red with fine metallic flake that stays red and does not fade to pink or orange
- Durable TPU material: high-performance protection that resists rock chips, road debris, scratches, and UV damage
- Self-adhesive film: bonds securely to your factory paint with no extra glue or primer needed
- Heat-activated self-healing topcoat: erases light marks and swirls with a heat gun, hot water, or direct sun
- Hydrophobic surface: repels water, mud, bird droppings, and tree sap. Stains do not stick. UV rays do not fade
- Scratch-resistant and anti-corrosion: stands up to keys, brushes, road salt, and harsh weather
- Heat and UV resistant: no yellowing, no bubbling, no cracking over time
- Acrylic-based robust adhesive: strong bond that does not lift at edges. Lets you slide and reposition during install
- Easy to slide and reposition: adjust the film while you lay it down. Press firmly when position is right
Specifications
- Color: Vampire Red.
- Finish: Glossy Metallic.
- Application Method: Dry Application.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Things You Should Know:
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
