Ultra Gloss China Blue Color PPF (Paint Protection Film)
VinylFrog Ultra Gloss China Blue is a true mid-tone blue. It is not navy. It is not pastel. It sits right in the middle with a clean, high-gloss finish that catches light and throws it back like wet paint. The color is bright enough to stand out but never loud enough to feel out of place.
Self-healing topcoat erases minor scratches with heat. The hydrophobic surface repels water and resists stains. Maintenance is simple. Dry installation means no slip solution and no mess. The acrylic adhesive bonds strong and stays that way.
Closest to Porsche China Blue Metallic. Cleaner than standard light blue wraps.
Features
- Smooth glossy color finish: deep, reflective shine with a sleek, high-end look
- Durable TPU material: high-performance protection against road debris, rock chips, and scratches
- Self-adhesive film: bonds directly to factory paint with no extra glue or primer needed
- Heat-activated self-healing topcoat: erases minor scratches and swirl marks with a heat gun, hot water, or direct sun
- Hydrophobic surface: resists UV rays, stains, and corrosion. Water and dirt wipe clean
- Supreme surface protection: shields your paint from daily driving hazards
- Scratch-resistant and anti-corrosion: stands up to road salt, harsh weather, and light abrasion
- Heat and UV resistant: no fading, no yellowing, no cracking over time
- Acrylic-based robust adhesive: strong bond that does not lift at edges
-
Easy to slide and reposition: adjust the film while you lay it down. Press firmly when position is right
Specifications
- Color: China Blue.
- Finish: Ultra Gloss.
- Application Method: Dry Application, Wet Application.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
| Classification | Unit | Specs | Remarks | |
|---|---|---|---|---|
| Thickness | Top protected film | μm | 50±5% | PET |
| Self-healing Layer | μm | 10±5% | / | |
| Face Film | μm | 60±3 | Thermoplastic Polyurethane | |
| Color Layer | μm | 17±0.5 | ||
| Base Color Layer | μm | 70±0.5 | Thermoplastic Polyurethane | |
| Acrylic Adhesive | μm | 35±2 | Solvent-based | |
| Release liner | μm | 75±5% | Satin Semi-transparent White | |
| Surface | — | — | Super Glossy without Orange Peel | |
| Width | m | 1.52±1% | 4.98ft | |
| Length | m | 15±1% | 49.21ft | |
Physical properties
▲ General Properties
| Features | Test Method/Conditions | Data | |
|---|---|---|---|
| Gloss（60°） | GB 8807 | ≥90 | |
| Water Contact Angle | DL/T864 Appendix A | ≥90° | |
| Hardness | GB/T 6739 | ≥85A | |
| Elongation at Break | GB/T 1040 | ≥350% | |
| Coating Elongation at Break | GB/T 1040 | ≥85% | |
| Tensile Strength | GB/T 1040 | ≥18 MPa | |
| Initial Adhesion | FTM 9 | ≥8 N/25mm | |
| 24h 180° Peel Force | GB/T 2792 | ≥12 N/25mm | |
| Storage Aging Peel Force | GB/T 2792 | ≥10 N/25mm | |
| Application Aging Peel Force | GB/T 2792 | ≥16 N/25mm | |
| Peel Force | GB/T 2792 | ≤0.3 N/25mm | |
| Dimensional Stability (MD) | FTM 14 | ≤0.5mm | |
| Dimensional Stability (CD) | FTM 14 | ≤0.4mm | |
| Scratch Repair | (0.1mm) Copper brush & Heat gun | Repair Time ≤ 3 minutes | |
| Stain Resistance (oil-based pen) | GB/T 16422.2 | No visible water stain deposits | |
| Hydrolysis Resistance | QC/T 1171-2021 | Stable for over 200h | |
| Acid & Alkali Resistance | Exposure to 10% hydrochloric acid and 0.1 mol/L sodium hydroxide solution for 24h | No visual coating defects | |
| Yellowing ΔE | QUV Method 2000h | ≤2 | |
| Application Temperature | / | +20℃ to +30℃ | |
| Service Temperature | / | -50℃ to +110℃ | |
| Recommended Shelf Life | 15-25°C or 59-77° F and 45-50% Humidity | 2 years | |
| Time limits | Must use it within 3 months after receiving the wrap film | 3 months | |
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Original: $109.00
-65%$109.00
$38.15More Images
Ultra Gloss China Blue Color PPF (Paint Protection Film)
VinylFrog Ultra Gloss China Blue is a true mid-tone blue. It is not navy. It is not pastel. It sits right in the middle with a clean, high-gloss finish that catches light and throws it back like wet paint. The color is bright enough to stand out but never loud enough to feel out of place.
Self-healing topcoat erases minor scratches with heat. The hydrophobic surface repels water and resists stains. Maintenance is simple. Dry installation means no slip solution and no mess. The acrylic adhesive bonds strong and stays that way.
Closest to Porsche China Blue Metallic. Cleaner than standard light blue wraps.
Features
- Smooth glossy color finish: deep, reflective shine with a sleek, high-end look
- Durable TPU material: high-performance protection against road debris, rock chips, and scratches
- Self-adhesive film: bonds directly to factory paint with no extra glue or primer needed
- Heat-activated self-healing topcoat: erases minor scratches and swirl marks with a heat gun, hot water, or direct sun
- Hydrophobic surface: resists UV rays, stains, and corrosion. Water and dirt wipe clean
- Supreme surface protection: shields your paint from daily driving hazards
- Scratch-resistant and anti-corrosion: stands up to road salt, harsh weather, and light abrasion
- Heat and UV resistant: no fading, no yellowing, no cracking over time
- Acrylic-based robust adhesive: strong bond that does not lift at edges
-
Easy to slide and reposition: adjust the film while you lay it down. Press firmly when position is right
Specifications
- Color: China Blue.
- Finish: Ultra Gloss.
- Application Method: Dry Application, Wet Application.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
| Classification | Unit | Specs | Remarks | |
|---|---|---|---|---|
| Thickness | Top protected film | μm | 50±5% | PET |
| Self-healing Layer | μm | 10±5% | / | |
| Face Film | μm | 60±3 | Thermoplastic Polyurethane | |
| Color Layer | μm | 17±0.5 | ||
| Base Color Layer | μm | 70±0.5 | Thermoplastic Polyurethane | |
| Acrylic Adhesive | μm | 35±2 | Solvent-based | |
| Release liner | μm | 75±5% | Satin Semi-transparent White | |
| Surface | — | — | Super Glossy without Orange Peel | |
| Width | m | 1.52±1% | 4.98ft | |
| Length | m | 15±1% | 49.21ft | |
Physical properties
▲ General Properties
| Features | Test Method/Conditions | Data | |
|---|---|---|---|
| Gloss（60°） | GB 8807 | ≥90 | |
| Water Contact Angle | DL/T864 Appendix A | ≥90° | |
| Hardness | GB/T 6739 | ≥85A | |
| Elongation at Break | GB/T 1040 | ≥350% | |
| Coating Elongation at Break | GB/T 1040 | ≥85% | |
| Tensile Strength | GB/T 1040 | ≥18 MPa | |
| Initial Adhesion | FTM 9 | ≥8 N/25mm | |
| 24h 180° Peel Force | GB/T 2792 | ≥12 N/25mm | |
| Storage Aging Peel Force | GB/T 2792 | ≥10 N/25mm | |
| Application Aging Peel Force | GB/T 2792 | ≥16 N/25mm | |
| Peel Force | GB/T 2792 | ≤0.3 N/25mm | |
| Dimensional Stability (MD) | FTM 14 | ≤0.5mm | |
| Dimensional Stability (CD) | FTM 14 | ≤0.4mm | |
| Scratch Repair | (0.1mm) Copper brush & Heat gun | Repair Time ≤ 3 minutes | |
| Stain Resistance (oil-based pen) | GB/T 16422.2 | No visible water stain deposits | |
| Hydrolysis Resistance | QC/T 1171-2021 | Stable for over 200h | |
| Acid & Alkali Resistance | Exposure to 10% hydrochloric acid and 0.1 mol/L sodium hydroxide solution for 24h | No visual coating defects | |
| Yellowing ΔE | QUV Method 2000h | ≤2 | |
| Application Temperature | / | +20℃ to +30℃ | |
| Service Temperature | / | -50℃ to +110℃ | |
| Recommended Shelf Life | 15-25°C or 59-77° F and 45-50% Humidity | 2 years | |
| Time limits | Must use it within 3 months after receiving the wrap film | 3 months | |
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
VinylFrog Ultra Gloss China Blue is a true mid-tone blue. It is not navy. It is not pastel. It sits right in the middle with a clean, high-gloss finish that catches light and throws it back like wet paint. The color is bright enough to stand out but never loud enough to feel out of place.
Self-healing topcoat erases minor scratches with heat. The hydrophobic surface repels water and resists stains. Maintenance is simple. Dry installation means no slip solution and no mess. The acrylic adhesive bonds strong and stays that way.
Closest to Porsche China Blue Metallic. Cleaner than standard light blue wraps.
Features
- Smooth glossy color finish: deep, reflective shine with a sleek, high-end look
- Durable TPU material: high-performance protection against road debris, rock chips, and scratches
- Self-adhesive film: bonds directly to factory paint with no extra glue or primer needed
- Heat-activated self-healing topcoat: erases minor scratches and swirl marks with a heat gun, hot water, or direct sun
- Hydrophobic surface: resists UV rays, stains, and corrosion. Water and dirt wipe clean
- Supreme surface protection: shields your paint from daily driving hazards
- Scratch-resistant and anti-corrosion: stands up to road salt, harsh weather, and light abrasion
- Heat and UV resistant: no fading, no yellowing, no cracking over time
- Acrylic-based robust adhesive: strong bond that does not lift at edges
-
Easy to slide and reposition: adjust the film while you lay it down. Press firmly when position is right
Specifications
- Color: China Blue.
- Finish: Ultra Gloss.
- Application Method: Dry Application, Wet Application.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
| Classification | Unit | Specs | Remarks | |
|---|---|---|---|---|
| Thickness | Top protected film | μm | 50±5% | PET |
| Self-healing Layer | μm | 10±5% | / | |
| Face Film | μm | 60±3 | Thermoplastic Polyurethane | |
| Color Layer | μm | 17±0.5 | ||
| Base Color Layer | μm | 70±0.5 | Thermoplastic Polyurethane | |
| Acrylic Adhesive | μm | 35±2 | Solvent-based | |
| Release liner | μm | 75±5% | Satin Semi-transparent White | |
| Surface | — | — | Super Glossy without Orange Peel | |
| Width | m | 1.52±1% | 4.98ft | |
| Length | m | 15±1% | 49.21ft | |
Physical properties
▲ General Properties
| Features | Test Method/Conditions | Data | |
|---|---|---|---|
| Gloss（60°） | GB 8807 | ≥90 | |
| Water Contact Angle | DL/T864 Appendix A | ≥90° | |
| Hardness | GB/T 6739 | ≥85A | |
| Elongation at Break | GB/T 1040 | ≥350% | |
| Coating Elongation at Break | GB/T 1040 | ≥85% | |
| Tensile Strength | GB/T 1040 | ≥18 MPa | |
| Initial Adhesion | FTM 9 | ≥8 N/25mm | |
| 24h 180° Peel Force | GB/T 2792 | ≥12 N/25mm | |
| Storage Aging Peel Force | GB/T 2792 | ≥10 N/25mm | |
| Application Aging Peel Force | GB/T 2792 | ≥16 N/25mm | |
| Peel Force | GB/T 2792 | ≤0.3 N/25mm | |
| Dimensional Stability (MD) | FTM 14 | ≤0.5mm | |
| Dimensional Stability (CD) | FTM 14 | ≤0.4mm | |
| Scratch Repair | (0.1mm) Copper brush & Heat gun | Repair Time ≤ 3 minutes | |
| Stain Resistance (oil-based pen) | GB/T 16422.2 | No visible water stain deposits | |
| Hydrolysis Resistance | QC/T 1171-2021 | Stable for over 200h | |
| Acid & Alkali Resistance | Exposure to 10% hydrochloric acid and 0.1 mol/L sodium hydroxide solution for 24h | No visual coating defects | |
| Yellowing ΔE | QUV Method 2000h | ≤2 | |
| Application Temperature | / | +20℃ to +30℃ | |
| Service Temperature | / | -50℃ to +110℃ | |
| Recommended Shelf Life | 15-25°C or 59-77° F and 45-50% Humidity | 2 years | |
| Time limits | Must use it within 3 months after receiving the wrap film | 3 months | |
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
