Ultra Gloss Black Color PPF (Paint Protection Film)
Black is not just a color. It is a statement. VinylFrog Ultra Gloss Black delivers a finish so deep and reflective, it looks like the car was dipped in liquid glass. The gloss is intense. The black is pure. It does not fade to gray or wash out in sunlight. The film sits on top of your factory paint and takes every hit meant for it. Rock chips, road debris, tar, scratches, bird droppings, and bug splatter all hit the film first.
The self-healing topcoat erases light scratches and swirl marks with heat. The hydrophobic surface repels water and prevents stains from setting in. UV resistance means the black stays deep and does not oxidize. Dry installation with no slip solution means no mess, no bubbles, just a clean finish.
Closest to BMW Jet Black. Same depth as Porsche Basalt Black. Glossier than Audi Brilliant Black. Deeper than Mercedes Obsidian Black.
Features
- Mirror smooth finish: delivers superior clarity with no orange peel effect
- Hydrophilic properties: water and dirt slide off. No streaks. No stains
- Heat-activated self-healing topcoat: repairs scratches and swirl marks with a heat gun, hot water, or direct sun
- Maximum durability and protection: built to last. Resistant to yellowing and cracking
- Scratch and stain resistant: stands up to daily wear, road debris, and chemical spills
- High endurance with self-healing properties: minor damage disappears with heat exposure
- Transparent clarity: crystal clear finish without the orange peel texture
- Air-release channels: hassle-free dry installation. No slip solution. No bubbles
Specifications
- Application Method: Dry Application.
- Color: Black.
- Finish: Mirror Smooth Finish.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Things You Should Know
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Original: $109.00
-65%$109.00
$38.15More Images
Ultra Gloss Black Color PPF (Paint Protection Film)
Black is not just a color. It is a statement. VinylFrog Ultra Gloss Black delivers a finish so deep and reflective, it looks like the car was dipped in liquid glass. The gloss is intense. The black is pure. It does not fade to gray or wash out in sunlight. The film sits on top of your factory paint and takes every hit meant for it. Rock chips, road debris, tar, scratches, bird droppings, and bug splatter all hit the film first.
The self-healing topcoat erases light scratches and swirl marks with heat. The hydrophobic surface repels water and prevents stains from setting in. UV resistance means the black stays deep and does not oxidize. Dry installation with no slip solution means no mess, no bubbles, just a clean finish.
Closest to BMW Jet Black. Same depth as Porsche Basalt Black. Glossier than Audi Brilliant Black. Deeper than Mercedes Obsidian Black.
Features
- Mirror smooth finish: delivers superior clarity with no orange peel effect
- Hydrophilic properties: water and dirt slide off. No streaks. No stains
- Heat-activated self-healing topcoat: repairs scratches and swirl marks with a heat gun, hot water, or direct sun
- Maximum durability and protection: built to last. Resistant to yellowing and cracking
- Scratch and stain resistant: stands up to daily wear, road debris, and chemical spills
- High endurance with self-healing properties: minor damage disappears with heat exposure
- Transparent clarity: crystal clear finish without the orange peel texture
- Air-release channels: hassle-free dry installation. No slip solution. No bubbles
Specifications
- Application Method: Dry Application.
- Color: Black.
- Finish: Mirror Smooth Finish.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Things You Should Know
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Black is not just a color. It is a statement. VinylFrog Ultra Gloss Black delivers a finish so deep and reflective, it looks like the car was dipped in liquid glass. The gloss is intense. The black is pure. It does not fade to gray or wash out in sunlight. The film sits on top of your factory paint and takes every hit meant for it. Rock chips, road debris, tar, scratches, bird droppings, and bug splatter all hit the film first.
The self-healing topcoat erases light scratches and swirl marks with heat. The hydrophobic surface repels water and prevents stains from setting in. UV resistance means the black stays deep and does not oxidize. Dry installation with no slip solution means no mess, no bubbles, just a clean finish.
Closest to BMW Jet Black. Same depth as Porsche Basalt Black. Glossier than Audi Brilliant Black. Deeper than Mercedes Obsidian Black.
Features
- Mirror smooth finish: delivers superior clarity with no orange peel effect
- Hydrophilic properties: water and dirt slide off. No streaks. No stains
- Heat-activated self-healing topcoat: repairs scratches and swirl marks with a heat gun, hot water, or direct sun
- Maximum durability and protection: built to last. Resistant to yellowing and cracking
- Scratch and stain resistant: stands up to daily wear, road debris, and chemical spills
- High endurance with self-healing properties: minor damage disappears with heat exposure
- Transparent clarity: crystal clear finish without the orange peel texture
- Air-release channels: hassle-free dry installation. No slip solution. No bubbles
Specifications
- Application Method: Dry Application.
- Color: Black.
- Finish: Mirror Smooth Finish.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Things You Should Know
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
