Super Matte Military Green Color PPF (Paint Protection Film)
VinylFrog Super Matte Military Green is a color with purpose. It sits between olive and sage, flat and unpolished, with no gloss and no reflection. The finish is steady and grounded, the kind of green that belongs on something built to handle rough conditions.
The film is built to handle the same. Road debris, rock chips, tar, UV rays, and rust are stopped at the surface. Your factory paint stays untouched underneath. The hydrophilic surface repels water and liquid contaminants, and the self-healing topcoat removes minor scratches with heat.
Closest to Land Rover Grasmere Green. Same depth as BMW Army Green. Flatter than Audi District Green. Darker than Porsche Oak Green Metallic.
Features
- Smooth matte color finish: flat, non-reflective surface that hides fingerprints and reduces glare
- Durable TPU material: high-performance protection against road debris, rock chips, and scratches
- Self-adhesive film: bonds directly to factory paint with no extra glue or primer needed
- Heat-activated self-healing topcoat: erases minor scratches and swirl marks with a heat gun, hot water, or direct sun
- Hydrophobic surface: resists UV rays, stains, and corrosion. Water and dirt wipe clean
- Supreme surface protection: shields your paint from daily driving hazards
- Scratch-resistant and anti-corrosion: stands up to road salt, harsh weather, and light abrasion
- Heat and UV resistant: no fading, no yellowing, no cracking over time
- Acrylic-based robust adhesive: strong bond that does not lift at edges
-
Easy to slide and reposition: adjust the film while you lay it down. Press firmly when position is right
Specifications
- Color: Military Green.
- Finish: Super Matte.
- Application Method: Dry Application.
- Packaging: Roll.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
Things You Should Know:
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Original: $109.00
-65%$109.00
$38.15More Images
Super Matte Military Green Color PPF (Paint Protection Film)
VinylFrog Super Matte Military Green is a color with purpose. It sits between olive and sage, flat and unpolished, with no gloss and no reflection. The finish is steady and grounded, the kind of green that belongs on something built to handle rough conditions.
The film is built to handle the same. Road debris, rock chips, tar, UV rays, and rust are stopped at the surface. Your factory paint stays untouched underneath. The hydrophilic surface repels water and liquid contaminants, and the self-healing topcoat removes minor scratches with heat.
Closest to Land Rover Grasmere Green. Same depth as BMW Army Green. Flatter than Audi District Green. Darker than Porsche Oak Green Metallic.
Features
- Smooth matte color finish: flat, non-reflective surface that hides fingerprints and reduces glare
- Durable TPU material: high-performance protection against road debris, rock chips, and scratches
- Self-adhesive film: bonds directly to factory paint with no extra glue or primer needed
- Heat-activated self-healing topcoat: erases minor scratches and swirl marks with a heat gun, hot water, or direct sun
- Hydrophobic surface: resists UV rays, stains, and corrosion. Water and dirt wipe clean
- Supreme surface protection: shields your paint from daily driving hazards
- Scratch-resistant and anti-corrosion: stands up to road salt, harsh weather, and light abrasion
- Heat and UV resistant: no fading, no yellowing, no cracking over time
- Acrylic-based robust adhesive: strong bond that does not lift at edges
-
Easy to slide and reposition: adjust the film while you lay it down. Press firmly when position is right
Specifications
- Color: Military Green.
- Finish: Super Matte.
- Application Method: Dry Application.
- Packaging: Roll.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
Things You Should Know:
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
VinylFrog Super Matte Military Green is a color with purpose. It sits between olive and sage, flat and unpolished, with no gloss and no reflection. The finish is steady and grounded, the kind of green that belongs on something built to handle rough conditions.
The film is built to handle the same. Road debris, rock chips, tar, UV rays, and rust are stopped at the surface. Your factory paint stays untouched underneath. The hydrophilic surface repels water and liquid contaminants, and the self-healing topcoat removes minor scratches with heat.
Closest to Land Rover Grasmere Green. Same depth as BMW Army Green. Flatter than Audi District Green. Darker than Porsche Oak Green Metallic.
Features
- Smooth matte color finish: flat, non-reflective surface that hides fingerprints and reduces glare
- Durable TPU material: high-performance protection against road debris, rock chips, and scratches
- Self-adhesive film: bonds directly to factory paint with no extra glue or primer needed
- Heat-activated self-healing topcoat: erases minor scratches and swirl marks with a heat gun, hot water, or direct sun
- Hydrophobic surface: resists UV rays, stains, and corrosion. Water and dirt wipe clean
- Supreme surface protection: shields your paint from daily driving hazards
- Scratch-resistant and anti-corrosion: stands up to road salt, harsh weather, and light abrasion
- Heat and UV resistant: no fading, no yellowing, no cracking over time
- Acrylic-based robust adhesive: strong bond that does not lift at edges
-
Easy to slide and reposition: adjust the film while you lay it down. Press firmly when position is right
Specifications
- Color: Military Green.
- Finish: Super Matte.
- Application Method: Dry Application.
- Packaging: Roll.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
Things You Should Know:
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
