Self-healing Soft Gray Headlight Tint
The Self-Healing Soft Gray Headlight Tint is a light smoke headlight tint film, one of the lightest shades made. It gives the lens a soft gray, smoked look when the lights are off and keeps them nearly as bright as stock at night, so it takes the glare off harsh LED or HID beams without darkening the road ahead.
The film is made from the same tough, flexible material used to protect lenses, with a self-healing top layer. Small scratches and wash marks disappear when you warm the film with a heat gun, hot water, or a sunny day, and it shields the lens from stone chips and yellowing. It goes on wet, not dry: spray the lens, slide the film into place, push the water out from the middle, then warm it to lock it down. Working wet lets you reposition it on a curved lens before it sets. Cut it to fit headlights, fog lights, side markers, and reflector lenses.
Features And Specifications
- Color: soft gray, a light smoke shade with a glossy finish.
- Shade strength: one of the lightest tints made, so your headlights stay nearly as bright as stock at night.
- Material: the same tough, flexible film used to protect car paint (TPU), not thin PVC that hazes and cracks.
- Self-healing top coat: light scratches and wash marks fade out when you warm the film with heat, hot water, or a sunny day.
- Lens protection: guards headlights against stone chips, grime, and sun yellowing.
- Adhesive: clear acrylic glue that grips firmly once set but still slides and repositions while you work.
- Application: wet only, no air-release channels. Spray the lens, slide the film on, push the water out, then warm it to set.
- Protective layer: ships with a peel-off top film so it arrives undamaged.
- Clean removal: peels off with a little heat and leaves little to no glue behind.
- Easy care: hand wash with a soft cloth, no polishing needed.
- Fits: headlights, fog lights, side markers, and reflector lenses.
- Lifetime: about a year on upright surfaces like headlight lenses.
- Sizes: 2ft, 4ft, 8ft, 16ft, 32ft, and 46ft rolls. A 4ft roll covers both headlights on most cars.
- Packaging: roll.
Note: This self-healing headlight film does not feature air-release channels and is designed for wet application.
Structure
General Description
- Features: Scratch Resistance, Protective Liner
- Type: Automotive, Architectural, Marketing Applications, Indoor & Outdoor
- Lifetime: 1 year (Based on Vertical Exposure)
- Adhesive Type: Acrylic-Based, Repositionable Ultra-Clear adhesive.
- Finish Color: Soft Gray
- Application Method: Water
Physical properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
Information on physical and chemical characteristics and values in this document are based upon tests we believe to be reliable and do not constitute a warranty. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of this material for their specific use. All technical data are subject to change. In case of any ambiguities or differences between the English and foreign versions of this document, the English version shall prevail and lead.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable VinylFrog product packaging or product literature, VinylFrog warrants that each VinylFrog product meets the applicable VinylFrog product specification at the time VinylFrog ships the product.VinylFrog MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the VinylFrog product does not conform to this warranty, then the sole and exclusive remedy is, at VinylFrog’s option, replacement of the VinylFrog product or refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from the VinylFrog product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability.
Original: $6.29
-65%$6.29
$2.20More Images
Self-healing Soft Gray Headlight Tint
The Self-Healing Soft Gray Headlight Tint is a light smoke headlight tint film, one of the lightest shades made. It gives the lens a soft gray, smoked look when the lights are off and keeps them nearly as bright as stock at night, so it takes the glare off harsh LED or HID beams without darkening the road ahead.
The film is made from the same tough, flexible material used to protect lenses, with a self-healing top layer. Small scratches and wash marks disappear when you warm the film with a heat gun, hot water, or a sunny day, and it shields the lens from stone chips and yellowing. It goes on wet, not dry: spray the lens, slide the film into place, push the water out from the middle, then warm it to lock it down. Working wet lets you reposition it on a curved lens before it sets. Cut it to fit headlights, fog lights, side markers, and reflector lenses.
Features And Specifications
- Color: soft gray, a light smoke shade with a glossy finish.
- Shade strength: one of the lightest tints made, so your headlights stay nearly as bright as stock at night.
- Material: the same tough, flexible film used to protect car paint (TPU), not thin PVC that hazes and cracks.
- Self-healing top coat: light scratches and wash marks fade out when you warm the film with heat, hot water, or a sunny day.
- Lens protection: guards headlights against stone chips, grime, and sun yellowing.
- Adhesive: clear acrylic glue that grips firmly once set but still slides and repositions while you work.
- Application: wet only, no air-release channels. Spray the lens, slide the film on, push the water out, then warm it to set.
- Protective layer: ships with a peel-off top film so it arrives undamaged.
- Clean removal: peels off with a little heat and leaves little to no glue behind.
- Easy care: hand wash with a soft cloth, no polishing needed.
- Fits: headlights, fog lights, side markers, and reflector lenses.
- Lifetime: about a year on upright surfaces like headlight lenses.
- Sizes: 2ft, 4ft, 8ft, 16ft, 32ft, and 46ft rolls. A 4ft roll covers both headlights on most cars.
- Packaging: roll.
Note: This self-healing headlight film does not feature air-release channels and is designed for wet application.
Structure
General Description
- Features: Scratch Resistance, Protective Liner
- Type: Automotive, Architectural, Marketing Applications, Indoor & Outdoor
- Lifetime: 1 year (Based on Vertical Exposure)
- Adhesive Type: Acrylic-Based, Repositionable Ultra-Clear adhesive.
- Finish Color: Soft Gray
- Application Method: Water
Physical properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
Information on physical and chemical characteristics and values in this document are based upon tests we believe to be reliable and do not constitute a warranty. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of this material for their specific use. All technical data are subject to change. In case of any ambiguities or differences between the English and foreign versions of this document, the English version shall prevail and lead.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable VinylFrog product packaging or product literature, VinylFrog warrants that each VinylFrog product meets the applicable VinylFrog product specification at the time VinylFrog ships the product.VinylFrog MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the VinylFrog product does not conform to this warranty, then the sole and exclusive remedy is, at VinylFrog’s option, replacement of the VinylFrog product or refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from the VinylFrog product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Self-Healing Soft Gray Headlight Tint is a light smoke headlight tint film, one of the lightest shades made. It gives the lens a soft gray, smoked look when the lights are off and keeps them nearly as bright as stock at night, so it takes the glare off harsh LED or HID beams without darkening the road ahead.
The film is made from the same tough, flexible material used to protect lenses, with a self-healing top layer. Small scratches and wash marks disappear when you warm the film with a heat gun, hot water, or a sunny day, and it shields the lens from stone chips and yellowing. It goes on wet, not dry: spray the lens, slide the film into place, push the water out from the middle, then warm it to lock it down. Working wet lets you reposition it on a curved lens before it sets. Cut it to fit headlights, fog lights, side markers, and reflector lenses.
Features And Specifications
- Color: soft gray, a light smoke shade with a glossy finish.
- Shade strength: one of the lightest tints made, so your headlights stay nearly as bright as stock at night.
- Material: the same tough, flexible film used to protect car paint (TPU), not thin PVC that hazes and cracks.
- Self-healing top coat: light scratches and wash marks fade out when you warm the film with heat, hot water, or a sunny day.
- Lens protection: guards headlights against stone chips, grime, and sun yellowing.
- Adhesive: clear acrylic glue that grips firmly once set but still slides and repositions while you work.
- Application: wet only, no air-release channels. Spray the lens, slide the film on, push the water out, then warm it to set.
- Protective layer: ships with a peel-off top film so it arrives undamaged.
- Clean removal: peels off with a little heat and leaves little to no glue behind.
- Easy care: hand wash with a soft cloth, no polishing needed.
- Fits: headlights, fog lights, side markers, and reflector lenses.
- Lifetime: about a year on upright surfaces like headlight lenses.
- Sizes: 2ft, 4ft, 8ft, 16ft, 32ft, and 46ft rolls. A 4ft roll covers both headlights on most cars.
- Packaging: roll.
Note: This self-healing headlight film does not feature air-release channels and is designed for wet application.
Structure
General Description
- Features: Scratch Resistance, Protective Liner
- Type: Automotive, Architectural, Marketing Applications, Indoor & Outdoor
- Lifetime: 1 year (Based on Vertical Exposure)
- Adhesive Type: Acrylic-Based, Repositionable Ultra-Clear adhesive.
- Finish Color: Soft Gray
- Application Method: Water
Physical properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
Information on physical and chemical characteristics and values in this document are based upon tests we believe to be reliable and do not constitute a warranty. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of this material for their specific use. All technical data are subject to change. In case of any ambiguities or differences between the English and foreign versions of this document, the English version shall prevail and lead.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable VinylFrog product packaging or product literature, VinylFrog warrants that each VinylFrog product meets the applicable VinylFrog product specification at the time VinylFrog ships the product.VinylFrog MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the VinylFrog product does not conform to this warranty, then the sole and exclusive remedy is, at VinylFrog’s option, replacement of the VinylFrog product or refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from the VinylFrog product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability.
