Self-Healing Light Black Headlight Film (Wet Apply)
This self-healing light black headlight film is built from TPU, not standard vinyl, and that's what sets it apart from the air-channel version in the lineup. About 82% of light still passes through, so it reads as barely tinted, closer to a clear protective layer with a faint smoke cast than a true dark tint.
The self-healing topcoat is the standout feature. Light scratches and swirl marks from road debris fade on their own once the film warms up in the sun or under a heat gun, keeping the surface looking clean without buffing or replacing the film.
This version installs wet rather than dry. With no air channels, it goes on using a slip solution and squeegee instead of a dry press. That tradeoff pays off in a smoother, glassier finish once it's fully set and cured. The adhesive is acrylic-based and stays repositionable while wet, giving you time to adjust placement before it locks in for good. Fits headlights, taillights, fog lights, and marker light housings.
Features And Specifications:
- Genuine TPU film, tested to let about 82% of light through for a barely-there tint
- Self-healing topcoat erases light scratches and swirl marks with heat from the sun or a heat gun
- Resists moisture, humidity, and everyday water exposure without lifting
- Stands up to heat, UV rays, and minor scratches without cracking or yellowing
- Super glossy finish that goes on smooth and wipes clean during regular washing
- Comes with a protective top layer that peels away right before installation
- Acrylic adhesive that stays repositionable while wet, then locks in firmly once set
- Installs wet with a slip solution and squeegee for a smoother, bubble-free finish
- Rated for 1 year of outdoor use on vertical surfaces like headlights and taillights
- Fits headlights, taillights, fog lights, and marker light housings, indoors or out
- Sizes available: 2ft, 4ft, 8ft, 16ft, 32ft, and 46ft full roll.
- Color: Light Black.
Note: This self-healing headlight film does not feature air-release channels and is designed for wet application.
Video
Structure
General Description
- Features: Scratch Resistance, Protective Liner
- Type: Automotive, Architectural, Marketing Applications, Indoor & Outdoor
- Adhesive Type: Acrylic-Based, Repositionable Ultra-Clear adhesive.
- Finish Color: Light Black
- Application Method: Water
Physical properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
Information on physical and chemical characteristics and values in this document are based upon tests we believe to be reliable and do not constitute a warranty. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of this material for their specific use. All technical data are subject to change. In case of any ambiguities or differences between the English and foreign versions of this document, the English version shall prevail and lead.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable VinylFrog product packaging or product literature, VinylFrog warrants that each VinylFrog product meets the applicable VinylFrog product specification at the time VinylFrog ships the product.VinylFrog MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the VinylFrog product does not conform to this warranty, then the sole and exclusive remedy is, at VinylFrog’s option, replacement of the VinylFrog product or refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from the VinylFrog product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability.
Original: $6.99
-65%$6.99
$2.45More Images
Self-Healing Light Black Headlight Film (Wet Apply)
This self-healing light black headlight film is built from TPU, not standard vinyl, and that's what sets it apart from the air-channel version in the lineup. About 82% of light still passes through, so it reads as barely tinted, closer to a clear protective layer with a faint smoke cast than a true dark tint.
The self-healing topcoat is the standout feature. Light scratches and swirl marks from road debris fade on their own once the film warms up in the sun or under a heat gun, keeping the surface looking clean without buffing or replacing the film.
This version installs wet rather than dry. With no air channels, it goes on using a slip solution and squeegee instead of a dry press. That tradeoff pays off in a smoother, glassier finish once it's fully set and cured. The adhesive is acrylic-based and stays repositionable while wet, giving you time to adjust placement before it locks in for good. Fits headlights, taillights, fog lights, and marker light housings.
Features And Specifications:
- Genuine TPU film, tested to let about 82% of light through for a barely-there tint
- Self-healing topcoat erases light scratches and swirl marks with heat from the sun or a heat gun
- Resists moisture, humidity, and everyday water exposure without lifting
- Stands up to heat, UV rays, and minor scratches without cracking or yellowing
- Super glossy finish that goes on smooth and wipes clean during regular washing
- Comes with a protective top layer that peels away right before installation
- Acrylic adhesive that stays repositionable while wet, then locks in firmly once set
- Installs wet with a slip solution and squeegee for a smoother, bubble-free finish
- Rated for 1 year of outdoor use on vertical surfaces like headlights and taillights
- Fits headlights, taillights, fog lights, and marker light housings, indoors or out
- Sizes available: 2ft, 4ft, 8ft, 16ft, 32ft, and 46ft full roll.
- Color: Light Black.
Note: This self-healing headlight film does not feature air-release channels and is designed for wet application.
Video
Structure
General Description
- Features: Scratch Resistance, Protective Liner
- Type: Automotive, Architectural, Marketing Applications, Indoor & Outdoor
- Adhesive Type: Acrylic-Based, Repositionable Ultra-Clear adhesive.
- Finish Color: Light Black
- Application Method: Water
Physical properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
Information on physical and chemical characteristics and values in this document are based upon tests we believe to be reliable and do not constitute a warranty. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of this material for their specific use. All technical data are subject to change. In case of any ambiguities or differences between the English and foreign versions of this document, the English version shall prevail and lead.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable VinylFrog product packaging or product literature, VinylFrog warrants that each VinylFrog product meets the applicable VinylFrog product specification at the time VinylFrog ships the product.VinylFrog MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the VinylFrog product does not conform to this warranty, then the sole and exclusive remedy is, at VinylFrog’s option, replacement of the VinylFrog product or refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from the VinylFrog product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This self-healing light black headlight film is built from TPU, not standard vinyl, and that's what sets it apart from the air-channel version in the lineup. About 82% of light still passes through, so it reads as barely tinted, closer to a clear protective layer with a faint smoke cast than a true dark tint.
The self-healing topcoat is the standout feature. Light scratches and swirl marks from road debris fade on their own once the film warms up in the sun or under a heat gun, keeping the surface looking clean without buffing or replacing the film.
This version installs wet rather than dry. With no air channels, it goes on using a slip solution and squeegee instead of a dry press. That tradeoff pays off in a smoother, glassier finish once it's fully set and cured. The adhesive is acrylic-based and stays repositionable while wet, giving you time to adjust placement before it locks in for good. Fits headlights, taillights, fog lights, and marker light housings.
Features And Specifications:
- Genuine TPU film, tested to let about 82% of light through for a barely-there tint
- Self-healing topcoat erases light scratches and swirl marks with heat from the sun or a heat gun
- Resists moisture, humidity, and everyday water exposure without lifting
- Stands up to heat, UV rays, and minor scratches without cracking or yellowing
- Super glossy finish that goes on smooth and wipes clean during regular washing
- Comes with a protective top layer that peels away right before installation
- Acrylic adhesive that stays repositionable while wet, then locks in firmly once set
- Installs wet with a slip solution and squeegee for a smoother, bubble-free finish
- Rated for 1 year of outdoor use on vertical surfaces like headlights and taillights
- Fits headlights, taillights, fog lights, and marker light housings, indoors or out
- Sizes available: 2ft, 4ft, 8ft, 16ft, 32ft, and 46ft full roll.
- Color: Light Black.
Note: This self-healing headlight film does not feature air-release channels and is designed for wet application.
Video
Structure
General Description
- Features: Scratch Resistance, Protective Liner
- Type: Automotive, Architectural, Marketing Applications, Indoor & Outdoor
- Adhesive Type: Acrylic-Based, Repositionable Ultra-Clear adhesive.
- Finish Color: Light Black
- Application Method: Water
Physical properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
Information on physical and chemical characteristics and values in this document are based upon tests we believe to be reliable and do not constitute a warranty. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of this material for their specific use. All technical data are subject to change. In case of any ambiguities or differences between the English and foreign versions of this document, the English version shall prevail and lead.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable VinylFrog product packaging or product literature, VinylFrog warrants that each VinylFrog product meets the applicable VinylFrog product specification at the time VinylFrog ships the product.VinylFrog MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the VinylFrog product does not conform to this warranty, then the sole and exclusive remedy is, at VinylFrog’s option, replacement of the VinylFrog product or refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from the VinylFrog product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability.
