Red Headlight Film With Air Channel Paper Liner
Bright glossy red transforms your headlights with a custom sporty look. This wet application film features an air release liner for easy bubble free installation over curved lenses. It protects against UV fading, scratches, and road debris while staying vibrant through rain and snow. Check your local street laws before applying transparent red tint t headlights.
Features And Specifications
- Sizes available: 1ft, 2ft, 4ft, 8ft, 16ft, and 32ft.
- Packaging: Roll.
- Color: Vibrant, glossy translucent red
- Heat, UV & scratch resistant: protects lenses from yellowing and everyday wear
- Weatherproof: holds its color through rain, snow, and road spray without lifting
- Wet-application design: slip solution allows for easy repositioning and slide-adjustment
- Air-channel paper liner: built-in microchannels evacuate water and air for a smooth, bubble-free finish
- Repositionable adhesive: slides during install, then locks firm as the wet solution dries
- Lifetime: about 1 year, rated on vertical-surface exposure
- Best on: Taillights, fog lights, side markers, and front headlights (where permitted by local law)
Please Note: This light tint film is semi-transparent. The color may look slightly different on the white backing paper, but once the backing is removed and applied to your lights, you’ll see the true color.
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Video
Physical Properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
The physical properties of the product detailed in this document are based on tests that we believe to be reliable. They are intended only as a source of information and are given without guarantee. They do not constitute a warranty. Purchasers should independently assess the suitability of this material for their specific use prior to application.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable product packaging or literature, VinylFrog warrants that each product meets the applicable specifications at the time of shipment. We make no other warranties or conditions, express or implied, including but not limited to any implied warranty or condition of merchantability or fitness for a particular purpose, or any implied warranty or condition arising out of a course of dealing, custom, or usage of trade. If the VinylFrog product does not conform to this warranty, then based on our discretion, the sole and exclusive remedy is either the replacement of the product or a refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from its product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Durability
The durability of the product is based on exposure conditions in South China. Actual performance life will depend on substrate preparation, exposure conditions, and maintenance of the product. For instance, in areas with excessively high temperature, industrial pollution, or high altitude, exterior performance will decrease.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Car Light Protection Film. Do not overstretch and overheat. Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
More Images
Red Headlight Film With Air Channel Paper Liner
Bright glossy red transforms your headlights with a custom sporty look. This wet application film features an air release liner for easy bubble free installation over curved lenses. It protects against UV fading, scratches, and road debris while staying vibrant through rain and snow. Check your local street laws before applying transparent red tint t headlights.
Features And Specifications
- Sizes available: 1ft, 2ft, 4ft, 8ft, 16ft, and 32ft.
- Packaging: Roll.
- Color: Vibrant, glossy translucent red
- Heat, UV & scratch resistant: protects lenses from yellowing and everyday wear
- Weatherproof: holds its color through rain, snow, and road spray without lifting
- Wet-application design: slip solution allows for easy repositioning and slide-adjustment
- Air-channel paper liner: built-in microchannels evacuate water and air for a smooth, bubble-free finish
- Repositionable adhesive: slides during install, then locks firm as the wet solution dries
- Lifetime: about 1 year, rated on vertical-surface exposure
- Best on: Taillights, fog lights, side markers, and front headlights (where permitted by local law)
Please Note: This light tint film is semi-transparent. The color may look slightly different on the white backing paper, but once the backing is removed and applied to your lights, you’ll see the true color.
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Video
Physical Properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
The physical properties of the product detailed in this document are based on tests that we believe to be reliable. They are intended only as a source of information and are given without guarantee. They do not constitute a warranty. Purchasers should independently assess the suitability of this material for their specific use prior to application.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable product packaging or literature, VinylFrog warrants that each product meets the applicable specifications at the time of shipment. We make no other warranties or conditions, express or implied, including but not limited to any implied warranty or condition of merchantability or fitness for a particular purpose, or any implied warranty or condition arising out of a course of dealing, custom, or usage of trade. If the VinylFrog product does not conform to this warranty, then based on our discretion, the sole and exclusive remedy is either the replacement of the product or a refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from its product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Durability
The durability of the product is based on exposure conditions in South China. Actual performance life will depend on substrate preparation, exposure conditions, and maintenance of the product. For instance, in areas with excessively high temperature, industrial pollution, or high altitude, exterior performance will decrease.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Car Light Protection Film. Do not overstretch and overheat. Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Bright glossy red transforms your headlights with a custom sporty look. This wet application film features an air release liner for easy bubble free installation over curved lenses. It protects against UV fading, scratches, and road debris while staying vibrant through rain and snow. Check your local street laws before applying transparent red tint t headlights.
Features And Specifications
- Sizes available: 1ft, 2ft, 4ft, 8ft, 16ft, and 32ft.
- Packaging: Roll.
- Color: Vibrant, glossy translucent red
- Heat, UV & scratch resistant: protects lenses from yellowing and everyday wear
- Weatherproof: holds its color through rain, snow, and road spray without lifting
- Wet-application design: slip solution allows for easy repositioning and slide-adjustment
- Air-channel paper liner: built-in microchannels evacuate water and air for a smooth, bubble-free finish
- Repositionable adhesive: slides during install, then locks firm as the wet solution dries
- Lifetime: about 1 year, rated on vertical-surface exposure
- Best on: Taillights, fog lights, side markers, and front headlights (where permitted by local law)
Please Note: This light tint film is semi-transparent. The color may look slightly different on the white backing paper, but once the backing is removed and applied to your lights, you’ll see the true color.
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Video
Physical Properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
The physical properties of the product detailed in this document are based on tests that we believe to be reliable. They are intended only as a source of information and are given without guarantee. They do not constitute a warranty. Purchasers should independently assess the suitability of this material for their specific use prior to application.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable product packaging or literature, VinylFrog warrants that each product meets the applicable specifications at the time of shipment. We make no other warranties or conditions, express or implied, including but not limited to any implied warranty or condition of merchantability or fitness for a particular purpose, or any implied warranty or condition arising out of a course of dealing, custom, or usage of trade. If the VinylFrog product does not conform to this warranty, then based on our discretion, the sole and exclusive remedy is either the replacement of the product or a refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from its product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Durability
The durability of the product is based on exposure conditions in South China. Actual performance life will depend on substrate preparation, exposure conditions, and maintenance of the product. For instance, in areas with excessively high temperature, industrial pollution, or high altitude, exterior performance will decrease.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Car Light Protection Film. Do not overstretch and overheat. Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
