Gloss Light Black Headlight Tint Film
VinylFrog’s Light black headlight tint film darkens factory-clear lenses with a glossy smoke finish, while keeping the beam pattern and housing detail visible underneath. About 43% of light still passes through, so the look changes without sealing the lens into a full blackout.
The finish sets it apart. A high-gloss top layer sits over a see-through black base with a warm undertone. Under direct light it throws a soft amber-brown reflection instead of sitting flat, which is what separates it from the deeper satin and blackout tints in the range. It's built for drivers who want the lights darkened just enough to notice.
The film holds up too. A protected top layer sits over a strong adhesive that grips firmly but still lets you reposition it before pressing down for good. It handles temperatures from well below freezing to well above engine-bay heat without lifting or going soft. Built-in air channels let it settle onto curved lens surfaces bubble-free. Fits headlights, taillights, fog lights, and marker light housings.
Features And Specifications
- Rated for 1 year of outdoor use on vertical surfaces like headlights and taillights
- Lets about 43% of light through, so it darkens the look without killing visibility
- Resists moisture, humidity, and everyday water exposure without lifting
- Stands up to heat, UV rays, and minor scratches without cracking or fading
- High-gloss finish that goes on clean and wipes down easily during regular washing
- Comes with a protective top layer that peels away right before installation
- Acrylic adhesive that grips firmly but stays repositionable until you press it down for good
- Slides into place so you can adjust it before locking in the final position
- Built-in air channels let you squeegee out bubbles and creases as you go
- Holds its color under sun exposure instead of yellowing over time
Please Note: This light tint film is semi-transparent. The color may look slightly different on the white backing paper, but once the backing is removed and applied to your lights, you’ll see the true color.
General Description
- Features: Scratch Resistance, Protective Liner
- Type: Automotive, Architectural, Marketing Applications, Indoor & Outdoor
- Adhesive Type: Acrylic-Based, Repositionable Ultra-Clear adhesive.
- Finish Color: Light Black, Amber-brown reflection
- Application Method: On a clean, dry surface.
Video
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Physical Properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
The physical properties of the product detailed in this document are based on tests that we believe to be reliable. They are intended only as a source of information and are given without guarantee. They do not constitute a warranty. Purchasers should independently assess the suitability of this material for their specific use prior to application.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable product packaging or literature, VinylFrog warrants that each product meets the applicable specifications at the time of shipment. We make no other warranties or conditions, express or implied, including but not limited to any implied warranty or condition of merchantability or fitness for a particular purpose, or any implied warranty or condition arising out of a course of dealing, custom, or usage of trade. If the VinylFrog product does not conform to this warranty, then based on our discretion, the sole and exclusive remedy is either the replacement of the product or a refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from its product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Durability
The durability of the product is based on exposure conditions in South China. Actual performance life will depend on substrate preparation, exposure conditions, and maintenance of the product. For instance, in areas with excessively high temperature, industrial pollution, or high altitude, exterior performance will decrease.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Car Light Protection Film. Do not overstretch and overheat. Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Original: $2.69
-65%$2.69
$0.94More Images
Gloss Light Black Headlight Tint Film
VinylFrog’s Light black headlight tint film darkens factory-clear lenses with a glossy smoke finish, while keeping the beam pattern and housing detail visible underneath. About 43% of light still passes through, so the look changes without sealing the lens into a full blackout.
The finish sets it apart. A high-gloss top layer sits over a see-through black base with a warm undertone. Under direct light it throws a soft amber-brown reflection instead of sitting flat, which is what separates it from the deeper satin and blackout tints in the range. It's built for drivers who want the lights darkened just enough to notice.
The film holds up too. A protected top layer sits over a strong adhesive that grips firmly but still lets you reposition it before pressing down for good. It handles temperatures from well below freezing to well above engine-bay heat without lifting or going soft. Built-in air channels let it settle onto curved lens surfaces bubble-free. Fits headlights, taillights, fog lights, and marker light housings.
Features And Specifications
- Rated for 1 year of outdoor use on vertical surfaces like headlights and taillights
- Lets about 43% of light through, so it darkens the look without killing visibility
- Resists moisture, humidity, and everyday water exposure without lifting
- Stands up to heat, UV rays, and minor scratches without cracking or fading
- High-gloss finish that goes on clean and wipes down easily during regular washing
- Comes with a protective top layer that peels away right before installation
- Acrylic adhesive that grips firmly but stays repositionable until you press it down for good
- Slides into place so you can adjust it before locking in the final position
- Built-in air channels let you squeegee out bubbles and creases as you go
- Holds its color under sun exposure instead of yellowing over time
Please Note: This light tint film is semi-transparent. The color may look slightly different on the white backing paper, but once the backing is removed and applied to your lights, you’ll see the true color.
General Description
- Features: Scratch Resistance, Protective Liner
- Type: Automotive, Architectural, Marketing Applications, Indoor & Outdoor
- Adhesive Type: Acrylic-Based, Repositionable Ultra-Clear adhesive.
- Finish Color: Light Black, Amber-brown reflection
- Application Method: On a clean, dry surface.
Video
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Physical Properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
The physical properties of the product detailed in this document are based on tests that we believe to be reliable. They are intended only as a source of information and are given without guarantee. They do not constitute a warranty. Purchasers should independently assess the suitability of this material for their specific use prior to application.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable product packaging or literature, VinylFrog warrants that each product meets the applicable specifications at the time of shipment. We make no other warranties or conditions, express or implied, including but not limited to any implied warranty or condition of merchantability or fitness for a particular purpose, or any implied warranty or condition arising out of a course of dealing, custom, or usage of trade. If the VinylFrog product does not conform to this warranty, then based on our discretion, the sole and exclusive remedy is either the replacement of the product or a refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from its product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Durability
The durability of the product is based on exposure conditions in South China. Actual performance life will depend on substrate preparation, exposure conditions, and maintenance of the product. For instance, in areas with excessively high temperature, industrial pollution, or high altitude, exterior performance will decrease.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Car Light Protection Film. Do not overstretch and overheat. Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
VinylFrog’s Light black headlight tint film darkens factory-clear lenses with a glossy smoke finish, while keeping the beam pattern and housing detail visible underneath. About 43% of light still passes through, so the look changes without sealing the lens into a full blackout.
The finish sets it apart. A high-gloss top layer sits over a see-through black base with a warm undertone. Under direct light it throws a soft amber-brown reflection instead of sitting flat, which is what separates it from the deeper satin and blackout tints in the range. It's built for drivers who want the lights darkened just enough to notice.
The film holds up too. A protected top layer sits over a strong adhesive that grips firmly but still lets you reposition it before pressing down for good. It handles temperatures from well below freezing to well above engine-bay heat without lifting or going soft. Built-in air channels let it settle onto curved lens surfaces bubble-free. Fits headlights, taillights, fog lights, and marker light housings.
Features And Specifications
- Rated for 1 year of outdoor use on vertical surfaces like headlights and taillights
- Lets about 43% of light through, so it darkens the look without killing visibility
- Resists moisture, humidity, and everyday water exposure without lifting
- Stands up to heat, UV rays, and minor scratches without cracking or fading
- High-gloss finish that goes on clean and wipes down easily during regular washing
- Comes with a protective top layer that peels away right before installation
- Acrylic adhesive that grips firmly but stays repositionable until you press it down for good
- Slides into place so you can adjust it before locking in the final position
- Built-in air channels let you squeegee out bubbles and creases as you go
- Holds its color under sun exposure instead of yellowing over time
Please Note: This light tint film is semi-transparent. The color may look slightly different on the white backing paper, but once the backing is removed and applied to your lights, you’ll see the true color.
General Description
- Features: Scratch Resistance, Protective Liner
- Type: Automotive, Architectural, Marketing Applications, Indoor & Outdoor
- Adhesive Type: Acrylic-Based, Repositionable Ultra-Clear adhesive.
- Finish Color: Light Black, Amber-brown reflection
- Application Method: On a clean, dry surface.
Video
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Physical Properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
The physical properties of the product detailed in this document are based on tests that we believe to be reliable. They are intended only as a source of information and are given without guarantee. They do not constitute a warranty. Purchasers should independently assess the suitability of this material for their specific use prior to application.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable product packaging or literature, VinylFrog warrants that each product meets the applicable specifications at the time of shipment. We make no other warranties or conditions, express or implied, including but not limited to any implied warranty or condition of merchantability or fitness for a particular purpose, or any implied warranty or condition arising out of a course of dealing, custom, or usage of trade. If the VinylFrog product does not conform to this warranty, then based on our discretion, the sole and exclusive remedy is either the replacement of the product or a refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from its product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Durability
The durability of the product is based on exposure conditions in South China. Actual performance life will depend on substrate preparation, exposure conditions, and maintenance of the product. For instance, in areas with excessively high temperature, industrial pollution, or high altitude, exterior performance will decrease.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Car Light Protection Film. Do not overstretch and overheat. Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
