High Glossy Ferrari Red Color PPF (Paint Protection Film)
VinylFrog High Glossy Ferrari Red captures the spirit of motorsport. The color is vivid, bright, and shimmery with a high-gloss finish that shines like fresh race paint.
The film shields your factory paint from road debris, rock chips, tar, bug splatter, tree sap, and bird droppings. No stubborn stains. No scratches. The hydrophilic layer prevents water from accumulating on the surface, so stains and streaks do not form.
The self-healing topcoat erases minor scratches with heat. Dry application means no slip solution and no mess. Air-release channels built into the film prevent bubbles and creases during installation.
Closest to Ferrari Rosso Corsa (488 / F8). Same brightness as Ferrari Rosso Scuderia. Deeper than standard red wraps. Cleaner than Mazda Soul Red Crystal.
Features
- Durable TPU material: high-performance acrylic-based adhesive for long-lasting protection
- Heat-activated self-healing topcoat: repairs minor scratches and swirl marks with a heat gun, hot water, or direct sun
- Scratch, UV, stain, and corrosion resistance: maintains long-term optical clarity with no fading or yellowing
- Mirror-smooth high-gloss finish: delivers a sleek and premium look with deep reflective shine
- Dry application support: faster, cleaner, and more controlled installation with no slip solution
- Integrated air-release channels: bubble-free and effortless application every time
- Hydrophilic surface: repels dust and maintains a cleaner appearance over time
- Flexible and easy to reposition: applies smoothly on complex curves. Easy to apply and maintain
Specifications
- Application Method: Dry Application.
- Color: Ferrari Red.
- Finish: High Glossy.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Things You Should Know
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Original: $109.00
-65%$109.00
$38.15More Images
High Glossy Ferrari Red Color PPF (Paint Protection Film)
VinylFrog High Glossy Ferrari Red captures the spirit of motorsport. The color is vivid, bright, and shimmery with a high-gloss finish that shines like fresh race paint.
The film shields your factory paint from road debris, rock chips, tar, bug splatter, tree sap, and bird droppings. No stubborn stains. No scratches. The hydrophilic layer prevents water from accumulating on the surface, so stains and streaks do not form.
The self-healing topcoat erases minor scratches with heat. Dry application means no slip solution and no mess. Air-release channels built into the film prevent bubbles and creases during installation.
Closest to Ferrari Rosso Corsa (488 / F8). Same brightness as Ferrari Rosso Scuderia. Deeper than standard red wraps. Cleaner than Mazda Soul Red Crystal.
Features
- Durable TPU material: high-performance acrylic-based adhesive for long-lasting protection
- Heat-activated self-healing topcoat: repairs minor scratches and swirl marks with a heat gun, hot water, or direct sun
- Scratch, UV, stain, and corrosion resistance: maintains long-term optical clarity with no fading or yellowing
- Mirror-smooth high-gloss finish: delivers a sleek and premium look with deep reflective shine
- Dry application support: faster, cleaner, and more controlled installation with no slip solution
- Integrated air-release channels: bubble-free and effortless application every time
- Hydrophilic surface: repels dust and maintains a cleaner appearance over time
- Flexible and easy to reposition: applies smoothly on complex curves. Easy to apply and maintain
Specifications
- Application Method: Dry Application.
- Color: Ferrari Red.
- Finish: High Glossy.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Things You Should Know
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
VinylFrog High Glossy Ferrari Red captures the spirit of motorsport. The color is vivid, bright, and shimmery with a high-gloss finish that shines like fresh race paint.
The film shields your factory paint from road debris, rock chips, tar, bug splatter, tree sap, and bird droppings. No stubborn stains. No scratches. The hydrophilic layer prevents water from accumulating on the surface, so stains and streaks do not form.
The self-healing topcoat erases minor scratches with heat. Dry application means no slip solution and no mess. Air-release channels built into the film prevent bubbles and creases during installation.
Closest to Ferrari Rosso Corsa (488 / F8). Same brightness as Ferrari Rosso Scuderia. Deeper than standard red wraps. Cleaner than Mazda Soul Red Crystal.
Features
- Durable TPU material: high-performance acrylic-based adhesive for long-lasting protection
- Heat-activated self-healing topcoat: repairs minor scratches and swirl marks with a heat gun, hot water, or direct sun
- Scratch, UV, stain, and corrosion resistance: maintains long-term optical clarity with no fading or yellowing
- Mirror-smooth high-gloss finish: delivers a sleek and premium look with deep reflective shine
- Dry application support: faster, cleaner, and more controlled installation with no slip solution
- Integrated air-release channels: bubble-free and effortless application every time
- Hydrophilic surface: repels dust and maintains a cleaner appearance over time
- Flexible and easy to reposition: applies smoothly on complex curves. Easy to apply and maintain
Specifications
- Application Method: Dry Application.
- Color: Ferrari Red.
- Finish: High Glossy.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Things You Should Know
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
