Glossy Pearl White Color PPF (Paint Protection Film)
VinylFrog Glossy Pearl White delivers a pearlescent shade that sits between pure white and soft silver. The finish is bright, clean, and high-end without being cold or sterile.
This is true TPU paint protection. The film shields your factory paint from road debris, grime, rock chips, tar, and sun-induced fading, so when you take it off, the original paint stays in impeccable condition.
The self-healing topcoat recovers from light abrasions with heat, while the hydrophilic surface repels water and stays slick. Dry installation means no slip solution is required, and air-release channels with a squeegee give you a bubble-free, professional finish.
It is closest to Porsche Pearl White Metallic. Same brightness as BMW Mineral White. Cleaner than standard gloss white wraps. Brighter than matte white.
Features
- High-grade TPU material: maximum durability and flexibility with no cracking or yellowing over time
- Self-healing topcoat: eliminates fine scratches with heat from a heat gun, hot water, or direct sun
- UV, corrosion, and stain resistance: advanced protection against sun damage, road salt, and chemical spills
- Mirror-smooth gloss finish: delivers a luxurious, high-end look with deep reflective shine
- Air-release technology: ensures a flawless, bubble-free result every time
- Precision fit design: fits cleanly with no trimming headaches
-
Effortless maintenance: washes clean with basic car soap and water
Specifications
- Application Method: Dry Application.
- Color: Pearl White.
- Finish: Smooth glossy.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Things You Should Know
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Original: $119.00
-65%$119.00
$41.65More Images
Glossy Pearl White Color PPF (Paint Protection Film)
VinylFrog Glossy Pearl White delivers a pearlescent shade that sits between pure white and soft silver. The finish is bright, clean, and high-end without being cold or sterile.
This is true TPU paint protection. The film shields your factory paint from road debris, grime, rock chips, tar, and sun-induced fading, so when you take it off, the original paint stays in impeccable condition.
The self-healing topcoat recovers from light abrasions with heat, while the hydrophilic surface repels water and stays slick. Dry installation means no slip solution is required, and air-release channels with a squeegee give you a bubble-free, professional finish.
It is closest to Porsche Pearl White Metallic. Same brightness as BMW Mineral White. Cleaner than standard gloss white wraps. Brighter than matte white.
Features
- High-grade TPU material: maximum durability and flexibility with no cracking or yellowing over time
- Self-healing topcoat: eliminates fine scratches with heat from a heat gun, hot water, or direct sun
- UV, corrosion, and stain resistance: advanced protection against sun damage, road salt, and chemical spills
- Mirror-smooth gloss finish: delivers a luxurious, high-end look with deep reflective shine
- Air-release technology: ensures a flawless, bubble-free result every time
- Precision fit design: fits cleanly with no trimming headaches
-
Effortless maintenance: washes clean with basic car soap and water
Specifications
- Application Method: Dry Application.
- Color: Pearl White.
- Finish: Smooth glossy.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Things You Should Know
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
VinylFrog Glossy Pearl White delivers a pearlescent shade that sits between pure white and soft silver. The finish is bright, clean, and high-end without being cold or sterile.
This is true TPU paint protection. The film shields your factory paint from road debris, grime, rock chips, tar, and sun-induced fading, so when you take it off, the original paint stays in impeccable condition.
The self-healing topcoat recovers from light abrasions with heat, while the hydrophilic surface repels water and stays slick. Dry installation means no slip solution is required, and air-release channels with a squeegee give you a bubble-free, professional finish.
It is closest to Porsche Pearl White Metallic. Same brightness as BMW Mineral White. Cleaner than standard gloss white wraps. Brighter than matte white.
Features
- High-grade TPU material: maximum durability and flexibility with no cracking or yellowing over time
- Self-healing topcoat: eliminates fine scratches with heat from a heat gun, hot water, or direct sun
- UV, corrosion, and stain resistance: advanced protection against sun damage, road salt, and chemical spills
- Mirror-smooth gloss finish: delivers a luxurious, high-end look with deep reflective shine
- Air-release technology: ensures a flawless, bubble-free result every time
- Precision fit design: fits cleanly with no trimming headaches
-
Effortless maintenance: washes clean with basic car soap and water
Specifications
- Application Method: Dry Application.
- Color: Pearl White.
- Finish: Smooth glossy.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Things You Should Know
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Durability:
The durability is based on South China exposure conditions. Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
