Glossy Metallic Royal Green Color PPF (Wet Application)
VinylFrog built this film for the driver who wants green that actually looks green. Not teal. Not emerald. Not a dark mess that reads black from ten feet away. Royal green. Deep, rich, and glossy with a metallic flake that catches light like wet paint.
This is a wet application film. That means you get more working time. More time to slide it into place. More time to get it right. The water-based method reduces the risk of lifting on complex curves and deep recesses. For large panels and full vehicle coverage, wet application gives you the room to breathe.
The TPU construction takes the hits. Rock chips. Road debris. Scratches. UV rays. The self-healing topcoat erases light marks with heat. The hydrophobic surface sheds water and stains.
Features
-
Glossy metallic royal green finish: a rich, reflective color effect that stays green and does not fade to teal or black
-
Color styling and paint protection combined: one film does both. No need to wrap first then protect
-
Heat-activated self-healing topcoat: removes minor scratches and swirl marks with a heat gun, hot water, or direct sun
-
Hydrophobic surface: excellent UV and stain resistance. Water and dirt wipe clean
-
Scratch and corrosion resistance: stands up to daily wear, road debris, and harsh weather
-
Pressure-sensitive acrylic adhesive: secure, long-lasting bonding with no lifting at the edges
-
User-friendly installation: clean removal with low residue if you need to take it off
Specifications
- Color: Royal Green
- Finish: Glossy Metallic
- Material: TPU (Thermoplastic Polyurethane)
- Application Method: Wet Application
- Adhesive: Pressure-Sensitive Acrylic Adhesive
- Size: 5ft × 49ft
- Packaging: Roll
Things You Should Know:
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
| Classification | Unit | Wet Specs | Remarks | |
|---|---|---|---|---|
| Thickness | Top protected film | μm | 50±2% | PET |
| Self-healing Layer | μm | 15±2% | / | |
| Face Film | μm | 160±8 | Thermoplastic Polyurethane | |
| Acrylic Adhesive | μm | 25±2% | Solvent-based | |
| Release liner | μm | 85±2% | Satin Semi-transparent White | |
| Surface | — | Glossy & Transparent | Super Glossy without Orange Peel | |
| Width | m | 1.52±0.01% | 4.98ft | |
| Length | m | 15±1% | 49.21ft | |
Physical properties
▲ General Properties
| Features | Test Method/Conditions | Data | |
|---|---|---|---|
| Gloss（60°） | GB 8807 | ≥90 | |
| Water Contact Angle | DL/T864 Appendix A | ≥75 | |
| Hardness | GB/T 6739 | ≥90 | |
| Elongation at Break | GB/T 1040 | ≥340% | |
| Coating Elongation at Break | GB/T 1040 | ≥85% | |
| Tensile Strength | GB/T 1040 | ≥20 MPa | |
| Peel Force | GB/T 2792 | ≥800 | |
| Scratch Repair | (0.1mm) Copper brush & Heat gun | Thermal Self-Healing | |
| Stain Resistance (oil-based pen) | GB/T 16422.2 | No Marks | |
| Acid & Alkali Resistance | Exposure to 10% hydrochloric acid and 0.1 mol/L sodium hydroxide solution for 24h | No Marks | |
| Yellowing ΔE | QUV Method 2000h | ≤2.4 | |
| Application Temperature | / | +20℃ to +30℃ | |
| Service Temperature | / | -50℃ to +110℃ | |
| Recommended Shelf Life | 15-25°C or 59-77° F and 45-50% Humidity | 2 years | |
| Time limits | Must use it within 3 months after receiving the wrap film | 3 months | |
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Original: $899.00
-65%$899.00
$314.65More Images
Glossy Metallic Royal Green Color PPF (Wet Application)
VinylFrog built this film for the driver who wants green that actually looks green. Not teal. Not emerald. Not a dark mess that reads black from ten feet away. Royal green. Deep, rich, and glossy with a metallic flake that catches light like wet paint.
This is a wet application film. That means you get more working time. More time to slide it into place. More time to get it right. The water-based method reduces the risk of lifting on complex curves and deep recesses. For large panels and full vehicle coverage, wet application gives you the room to breathe.
The TPU construction takes the hits. Rock chips. Road debris. Scratches. UV rays. The self-healing topcoat erases light marks with heat. The hydrophobic surface sheds water and stains.
Features
-
Glossy metallic royal green finish: a rich, reflective color effect that stays green and does not fade to teal or black
-
Color styling and paint protection combined: one film does both. No need to wrap first then protect
-
Heat-activated self-healing topcoat: removes minor scratches and swirl marks with a heat gun, hot water, or direct sun
-
Hydrophobic surface: excellent UV and stain resistance. Water and dirt wipe clean
-
Scratch and corrosion resistance: stands up to daily wear, road debris, and harsh weather
-
Pressure-sensitive acrylic adhesive: secure, long-lasting bonding with no lifting at the edges
-
User-friendly installation: clean removal with low residue if you need to take it off
Specifications
- Color: Royal Green
- Finish: Glossy Metallic
- Material: TPU (Thermoplastic Polyurethane)
- Application Method: Wet Application
- Adhesive: Pressure-Sensitive Acrylic Adhesive
- Size: 5ft × 49ft
- Packaging: Roll
Things You Should Know:
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
| Classification | Unit | Wet Specs | Remarks | |
|---|---|---|---|---|
| Thickness | Top protected film | μm | 50±2% | PET |
| Self-healing Layer | μm | 15±2% | / | |
| Face Film | μm | 160±8 | Thermoplastic Polyurethane | |
| Acrylic Adhesive | μm | 25±2% | Solvent-based | |
| Release liner | μm | 85±2% | Satin Semi-transparent White | |
| Surface | — | Glossy & Transparent | Super Glossy without Orange Peel | |
| Width | m | 1.52±0.01% | 4.98ft | |
| Length | m | 15±1% | 49.21ft | |
Physical properties
▲ General Properties
| Features | Test Method/Conditions | Data | |
|---|---|---|---|
| Gloss（60°） | GB 8807 | ≥90 | |
| Water Contact Angle | DL/T864 Appendix A | ≥75 | |
| Hardness | GB/T 6739 | ≥90 | |
| Elongation at Break | GB/T 1040 | ≥340% | |
| Coating Elongation at Break | GB/T 1040 | ≥85% | |
| Tensile Strength | GB/T 1040 | ≥20 MPa | |
| Peel Force | GB/T 2792 | ≥800 | |
| Scratch Repair | (0.1mm) Copper brush & Heat gun | Thermal Self-Healing | |
| Stain Resistance (oil-based pen) | GB/T 16422.2 | No Marks | |
| Acid & Alkali Resistance | Exposure to 10% hydrochloric acid and 0.1 mol/L sodium hydroxide solution for 24h | No Marks | |
| Yellowing ΔE | QUV Method 2000h | ≤2.4 | |
| Application Temperature | / | +20℃ to +30℃ | |
| Service Temperature | / | -50℃ to +110℃ | |
| Recommended Shelf Life | 15-25°C or 59-77° F and 45-50% Humidity | 2 years | |
| Time limits | Must use it within 3 months after receiving the wrap film | 3 months | |
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
VinylFrog built this film for the driver who wants green that actually looks green. Not teal. Not emerald. Not a dark mess that reads black from ten feet away. Royal green. Deep, rich, and glossy with a metallic flake that catches light like wet paint.
This is a wet application film. That means you get more working time. More time to slide it into place. More time to get it right. The water-based method reduces the risk of lifting on complex curves and deep recesses. For large panels and full vehicle coverage, wet application gives you the room to breathe.
The TPU construction takes the hits. Rock chips. Road debris. Scratches. UV rays. The self-healing topcoat erases light marks with heat. The hydrophobic surface sheds water and stains.
Features
-
Glossy metallic royal green finish: a rich, reflective color effect that stays green and does not fade to teal or black
-
Color styling and paint protection combined: one film does both. No need to wrap first then protect
-
Heat-activated self-healing topcoat: removes minor scratches and swirl marks with a heat gun, hot water, or direct sun
-
Hydrophobic surface: excellent UV and stain resistance. Water and dirt wipe clean
-
Scratch and corrosion resistance: stands up to daily wear, road debris, and harsh weather
-
Pressure-sensitive acrylic adhesive: secure, long-lasting bonding with no lifting at the edges
-
User-friendly installation: clean removal with low residue if you need to take it off
Specifications
- Color: Royal Green
- Finish: Glossy Metallic
- Material: TPU (Thermoplastic Polyurethane)
- Application Method: Wet Application
- Adhesive: Pressure-Sensitive Acrylic Adhesive
- Size: 5ft × 49ft
- Packaging: Roll
Things You Should Know:
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
| Classification | Unit | Wet Specs | Remarks | |
|---|---|---|---|---|
| Thickness | Top protected film | μm | 50±2% | PET |
| Self-healing Layer | μm | 15±2% | / | |
| Face Film | μm | 160±8 | Thermoplastic Polyurethane | |
| Acrylic Adhesive | μm | 25±2% | Solvent-based | |
| Release liner | μm | 85±2% | Satin Semi-transparent White | |
| Surface | — | Glossy & Transparent | Super Glossy without Orange Peel | |
| Width | m | 1.52±0.01% | 4.98ft | |
| Length | m | 15±1% | 49.21ft | |
Physical properties
▲ General Properties
| Features | Test Method/Conditions | Data | |
|---|---|---|---|
| Gloss（60°） | GB 8807 | ≥90 | |
| Water Contact Angle | DL/T864 Appendix A | ≥75 | |
| Hardness | GB/T 6739 | ≥90 | |
| Elongation at Break | GB/T 1040 | ≥340% | |
| Coating Elongation at Break | GB/T 1040 | ≥85% | |
| Tensile Strength | GB/T 1040 | ≥20 MPa | |
| Peel Force | GB/T 2792 | ≥800 | |
| Scratch Repair | (0.1mm) Copper brush & Heat gun | Thermal Self-Healing | |
| Stain Resistance (oil-based pen) | GB/T 16422.2 | No Marks | |
| Acid & Alkali Resistance | Exposure to 10% hydrochloric acid and 0.1 mol/L sodium hydroxide solution for 24h | No Marks | |
| Yellowing ΔE | QUV Method 2000h | ≤2.4 | |
| Application Temperature | / | +20℃ to +30℃ | |
| Service Temperature | / | -50℃ to +110℃ | |
| Recommended Shelf Life | 15-25°C or 59-77° F and 45-50% Humidity | 2 years | |
| Time limits | Must use it within 3 months after receiving the wrap film | 3 months | |
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
