Glossy Metallic Light Pink Pearl Vinyl Wrap

Give your vehicle a soft, elegant finish with the Glossy Metallic Light Pink Pearl Car Wrap by Vinyl Frog. This light pink pearl vinyl wrap features a pastel tone with a smooth pearlescent shine that stands out on the road.

We have made this pink car wrap from high-grade polymeric vinyl, so it offers durability and a strong bond with its pressure-sensitive adhesive. It resists fading, peeling, and cracking while maintaining its glossy finish.

Our vinyl car wrap also protects your vehicle from rock chips, road debris, and UV exposure. It includes air-release channels for bubble-free installation and is stretchable for a smooth fit on curves.

Product Features 

• Metallic Pearl Finish: Smooth, glossy surface in a soft Light Pink Pearl tone.
• Durable Material: High-grade polymeric vinyl built for long-term outdoor use.
• Strong Acrylic Adhesive: Secure bonding with clean removal and no surface damage when applied correctly.
• Easy & Bubble-Free Installation: Air-release channels allow the film to slide, reposition, and apply smoothly.
• Low Maintenance: Simple to clean and designed to keep its shine with minimal maintain.

Specifications

• Color: Light Pink Pearl
• Finish: High shine, glossy metallic
• Material: Polymeric PVC
• Adhesive: Acrylic-based, repositionable
• Protection: Water, heat, UV, and weather resistant
• Sizes: 5ft x 3.3ft, 10ft, 16ft, 33ft, 49ft, 59ft
• Packaging: Roll

Things You Should Know:

How to wrap a car?

Car wrap materials

Best car wrap

The cost to wrap a car

How Much Vinyl Needs To Wrap Your Vehicle

Structure

Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protects the underneath vinyl and is called the protection layer. After that, the high-grade polymeric vinyl is supported with pressure-sensitive acrylic adhesive. Lastly, there is a layer of High Quality 130um Plastic Liner.

Material

• High Grade Polymeric Calendared Vinyl Film
• Fashionable, Stunning Color

• With Air Release Channel
• Bubble-free Application

• Slideable; Repositionable

Medium Stretchable

The Maximum is 30 %

Functions

Recommended Uses

▲Standard Size & Appearance

Classification		Unit	Spec	Remark
Thickness	Top protected film	um	36±2%	PET
	Surface materials	um	120±2%	High-grade PVC-Polymeric
	Glue	um	30±2%	High-quality Solvent-based
	Plastic liner	um	130±2%(plastic)	－
Surface		－	Opaque	－
Width		mm	1520±0. 01%	5ft
Length		mm	1800+1%	59ft

Physical properties

▲General Properties

Features		Test Method	Results
Release force N/25mm		Temperature 25℃ and Humidity 50%	0.35
Initial tack g/25mm		under 26℃ and 64%, GB31125-2014	1360
Peel Strength N/25mm		25℃and 42%, GB/T2792-1998	7.05
Holding power(h)		25℃ and 50%, GB/T4851-1998	120
Shelf life		stored in +15°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place	2 years
Application temperature		/	+20℃ to +30℃
Service Temperature		/	-50℃ to +110℃
Durability		Vertical exposure	2 years
Time limits		Must use it within 3 months after receiving the wrap film	3 months
Aging Test 1		7 days under 65°C	No adhesive residue with heat
Aging Test 2		10 days under 65°C	No adhesive residue without heat
Shrinkage		/	less than 4%

 

Recommended application tools:  Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater.

Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents

CAUTION!

1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.