Candy Metallic Pink White Color PPF (Paint Protection Film)
VinylFrog pink white color PPF doesn't just add color. It gives protection too. It is a true TPU paint protection film that comes in a high-gloss pink with metallic flake. The flake shifts between pink and white as light and angle change.
Regular colored vinyl wraps sit on top and offer no protection, but this is true TPU PPF made from the same material used in high-end clear bras, so rock chips, road debris, light scratches, and UV damage hit the film instead of your factory paint.
The self-healing topcoat erases light marks with heat from hot water, a heat gun, or even a sunny day, and the film supports dry application with built-in air-release channels that prevent bubbles without messy slip solutions.
Features
- Self-healing topcoat: erases minor scratches with heat from a heat gun, hot water, or direct sun
- Durable TPU material: delivers long-lasting protection and flexibility without cracking or yellowing
- Scratch and corrosion resistance: keeps the surface clean and intact through daily driving and weather exposure
- Hydrophobic and UV-resistant surface: repels water and prevents color fading from sun damage
- Gloss Metallic color finish: gives a smooth, premium look that matches painted surfaces
- Strong adhesive: bonds securely for the long term without lifting or edge peeling
- Low maintenance surface: washes easily and stays clean with basic car soap and water
Specifications
- Application Method: Dry Application.
- Color: Pink White.
- Finish: Candy Metallic.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Things You Should Know
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Original: $119.00
-65%$119.00
$41.65More Images
Candy Metallic Pink White Color PPF (Paint Protection Film)
VinylFrog pink white color PPF doesn't just add color. It gives protection too. It is a true TPU paint protection film that comes in a high-gloss pink with metallic flake. The flake shifts between pink and white as light and angle change.
Regular colored vinyl wraps sit on top and offer no protection, but this is true TPU PPF made from the same material used in high-end clear bras, so rock chips, road debris, light scratches, and UV damage hit the film instead of your factory paint.
The self-healing topcoat erases light marks with heat from hot water, a heat gun, or even a sunny day, and the film supports dry application with built-in air-release channels that prevent bubbles without messy slip solutions.
Features
- Self-healing topcoat: erases minor scratches with heat from a heat gun, hot water, or direct sun
- Durable TPU material: delivers long-lasting protection and flexibility without cracking or yellowing
- Scratch and corrosion resistance: keeps the surface clean and intact through daily driving and weather exposure
- Hydrophobic and UV-resistant surface: repels water and prevents color fading from sun damage
- Gloss Metallic color finish: gives a smooth, premium look that matches painted surfaces
- Strong adhesive: bonds securely for the long term without lifting or edge peeling
- Low maintenance surface: washes easily and stays clean with basic car soap and water
Specifications
- Application Method: Dry Application.
- Color: Pink White.
- Finish: Candy Metallic.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Things You Should Know
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
VinylFrog pink white color PPF doesn't just add color. It gives protection too. It is a true TPU paint protection film that comes in a high-gloss pink with metallic flake. The flake shifts between pink and white as light and angle change.
Regular colored vinyl wraps sit on top and offer no protection, but this is true TPU PPF made from the same material used in high-end clear bras, so rock chips, road debris, light scratches, and UV damage hit the film instead of your factory paint.
The self-healing topcoat erases light marks with heat from hot water, a heat gun, or even a sunny day, and the film supports dry application with built-in air-release channels that prevent bubbles without messy slip solutions.
Features
- Self-healing topcoat: erases minor scratches with heat from a heat gun, hot water, or direct sun
- Durable TPU material: delivers long-lasting protection and flexibility without cracking or yellowing
- Scratch and corrosion resistance: keeps the surface clean and intact through daily driving and weather exposure
- Hydrophobic and UV-resistant surface: repels water and prevents color fading from sun damage
- Gloss Metallic color finish: gives a smooth, premium look that matches painted surfaces
- Strong adhesive: bonds securely for the long term without lifting or edge peeling
- Low maintenance surface: washes easily and stays clean with basic car soap and water
Specifications
- Application Method: Dry Application.
- Color: Pink White.
- Finish: Candy Metallic.
- Sizes available: 5ft x 3.3ft, 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Things You Should Know
Best Paint Protection Film (PPF)
How To Apply Paint Protection Film
PPF Vs Vinyl Wrap
How Long Does Paint Protection Film Last?
How Much Does Paint Protection Film Cost?
Video
Structure
Functions
Recommended Uses
▲ Standard Size & Appearance
Physical properties
▲ General Properties
Warranty & Installation Guidelines
- Warranty coverage: VinylFrog warrants each product meets its specifications at time of shipment. No other warranties, express or implied (including merchantability or fitness for a particular purpose).
- Sole remedy: If a product does not conform, VinylFrog will either replace it or refund the purchase price.
- Installation environment: Room temperature 25±3°C, humidity 50±5% RH, clean dust-free space with no visible airborne particles.
- Installation steps: Inspect surface, clean thoroughly, cut film to size, apply without bubbles or lifted edges, clean excess solution.
- Post-installation care: For one week after install, do not wash the vehicle or expose it to rain. This lets the adhesive fully bond.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Paint Protection Film. Do not overstretch and overheat. Post-heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
CAUTION!
1. We will peel off the protection layer before shipment if your order is 1m,3m or 5m in order to make the vinyl good for shipping.
2. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
3. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
